Tips in Extracting Popcorn Ceiling


Extracting Popcorn Ceiling is a fascinating project. It not only includes extracting the old ceiling, however also includes rewiring your house so that a new ceiling can be set up. However before you proceed with the project, you need to do the appropriate research study about the entire process so that you understand what to anticipate. And in case you are not knowledgeable about the extraction of the popcorn ceiling, here is a step by step guide that will help you.

When removing popcorn ceiling, ensure that you use protective gloves and shatterproof glass, as they will secure you from any danger of injury when working. After picking the preferred extraction Popcorn Ceiling Removal Austin professional, visit his office and make certain that everything is ready for the job. In addition to the equipment, you will need to rent or purchase a saw, screwdriver, hammer and other tools. Likewise, bring any heavy products with you to make certain that they too are safe throughout the removal.

There are 2 typical approaches of extracting popcorn ceilings. The first one is to use drywall glue or tape to anchor it to the ceiling. The benefit of this method is that it needs little effort; however, the problem with it is that it might not entirely remove the popcorn. Furthermore, the drywall glue or tape is a bit messy, which may make the whole job difficult.

The 2nd suggested method for removing popcorn ceiling is by utilizing drilling devices or strong commercial trucks with cranes to remove them. In order to effectively remove it, make certain that you remove all the light fixtures and other heavy components present on the ceiling. Moreover, extract all the tiles and lighting fixtures present in the room. Remove any type of decorations to make it much easier to access the screws or the jambs that can be extracted.

Scrapers are used for raveling the texture or covering on the walls and ceiling. It is best to use an old toothbrush or cotton swab as it allows scraping without damaging your floors or furniture. Take note that if there is any texture on the wall, make sure to smooth it out using scraper. Nevertheless, if you are preparing to scrape without harming your surface areas, you can utilize the very same item for the function. Just wet the things, spread it on the wall and allow it to sink into the wall or flooring.

Use the fiber brush and scrape along the surface of the item. Make sure you use security gloves when utilizing the asbestos scraper to prevent getting exposed to the compound. If the compound is exposed, it may trigger some health issue like shortness of breath, coughing, swelling of the lung tissue and other associated diseases. When you have scraped enough, you should now be able to see the popcorn. Now that the popcorn is removed, you can move on to the painting job.

Prior to applying the paint, you need to remove all designs on the ceilings. It is much better to remove them prior to using the paint due to the fact that you will not have to sand them later on. The next action is to apply a thin coat of paint on the ceiling utilizing the provided brush. This will cover the popcorn texture left on the ceilings.

For the third and last step, put the textured ceiling panels on top of the old one and let it dry for a few hours. You can then return to the lights and change the lights. Prior to setting up the lights on the ceilings, ensure that the panels are installed appropriately so that there is a new layer of texture applied which the brand-new layer matches the texture of the ceiling perfectly.

Learn More:

Popcorn Ceiling Removal Austin

2882 Barton Skyway #239 A

Austin, TX 78746